ASV-Stübbe-kalvoventtiilit

ASV-Stübben valmistama muovinen kalvoventtiili muun muassa teollisuuskemikaaleille. Kalvoventtiilit soveltuvat moniin eri käyttökohteisiin.

Kalvoventtiili MV308

• Kalvoventtiili suurella Cv-arvolla ja kompaktilla muotoilulla
• Integroitu paineilmatoimilaite
• Visuaalinen asennon ilmaisin
• Ihanteellinen venttiili   rajoitetuissa asennustiloissa
• Nimelliskoko DN12-15 / 3/8″-1/2″

Kalvoventtiili MV309

• Pneumaattisesti toimiva, kompakti kalvoventtiili
• Visuaalinen asennon ilmaisin
• Lyhyt asennuspituus
• NMUR:n mukainen ilmakytkentä
• Suurin ohjauspaine 6 bar
• Nimelliskoko DN15-32 / 1/2″-1 1/4″

DK-Lok-kalvoventtiilit

Dk-Lok:n valmistama kalvoventtiili vaativiin teollisuuden käyttökohteisiin. Saatavilla monia koko- ja materiaalivaihtoehtoja.

Kalvoventtiili (VD3)

• Working Pressure : 3,500 psig
• Instant open and close the valve with no o-ring no packing or no bellows in the flow stream
• Stainless Steel and Brass
• DK-Lok 1/4 in. and 6mm OD
• Female Pipe thread 1/4 in
• It is featured that the diaphragm valve serves economical, high performance and high cycle life time.
• The diaphragm valve is used for shut-off, isolation in gas control systems, and analyzer sampling systems.
• The valve ensures positive and consistent shut-off with manual and offers a metal to metal seal to atmosphere for leak integrity with thin plate diaphragm.

Kalvoventtiili (PVDC)

• Working Pressure 145psig(10bar)
• Working Temperature: -10~80°C (-23~176°F)
• Material: SS316L, SS316L VAR
• DCR, Dk-Lok, TBW 1/4″~3/4″ Size
• Minimal Particle Generation
• Moisture Contribution
• Maximum flow & Compact designed inner capacity.
• Minimal contributions of moisture, Oxygen and Hydrocarbon, Minimal particle generation.
• DK-Lok’s own electropolished.
• D.I water cleaned, assembled, tested & packaged in a certified clean room.
• Elgiloy diaphragm material with strong durability as well as corrosion resistance for long cycle life.
• PCTFE seat material with remarkable chemical & thermal resistance.

Kalvoventtiili (TVDC)

• Working Pressure 145psig(10bar)
• Working Temperature: -10~80°C (-23~176°F)
• Material: SS316L, SS316L VAR
• DCR, Dk-Lok, TBW 1/4″~3/4″ Size
• Minimal Particle Generation
• Moisture Contribution
• Maximum flow & Compact designed inner capacity.
• Minimal contributions of moisture, Oxygen and Hydrocarbon, Minimal particle generation.
• DK-Lok’s own electropolished.
• D.I water cleaned, assembled, tested & packaged in a certified clean room.
• Elgiloy diaphragm material with strong durability as well as corrosion resistance for long cycle life.
• PCTFE seat material with remarkable chemical & thermal resistance.

Kalvoventtiili (VDC)

• Working Pressure 145psig(10bar)
• Working Temperature: -10~80°C (-23~176°F)
• Material: SS316L, SS316L VAR
• DCR, Dk-Lok, TBW 1/4″~3/4″ Size
• Minimal Particle Generation
• Moisture Contribution
• Maximum flow & Compact designed inner capacity.
• Minimal contributions of moisture, Oxygen and Hydrocarbon, Minimal particle generation.
• DK-Lok’s own electropolished.
• D.I water cleaned, assembled, tested & packaged in a certified clean room.
• Elgiloy diaphragm material with strong durability as well as corrosion resistance for long cycle life.
• PCTFE seat material with remarkable chemical & thermal resistance.

Kalvoventtiili (VDF)

• Working Pressure 145psig(10bar)
• Working Temperature: -10~80°C (-23~176°F)
• Material: SS304, SS316L, SS316L VAR
• DCR, Dk-Lok, TBW 1/4″~3/4″ Size
• Minimal Particle Generation
• Moisture Contribution
• Maximum flow & Compact designed inner capacity.
• Minimal contributions of moisture, Oxygen and Hydrocarbon, Minimal particle generation.
• DK-Lok’s own electropolished.
• D.I water cleaned, assembled, tested & packaged in a certified clean room.
• Elgiloy diaphragm material with strong durability as well as corrosion resistance for long cycle life.
• PCTFE seat material with remarkable chemical & thermal resistance.