Dk-Lok:n valmistama kalvoventtiili vaativiin teollisuuden käyttökohteisiin. Saatavilla monia koko- ja materiaalivaihtoehtoja.
Kalvoventtiili (VD3)
- Working Pressure : 3,500 psig
- Instant open and close the valve with no o-ring no packing or no bellows in the flow stream
- Stainless Steel and Brass
- DK-Lok 1/4 in. and 6mm OD
- Female Pipe thread 1/4 in
- It is featured that the diaphragm valve serves economical, high performance and high cycle life time.
- The diaphragm valve is used for shut-off, isolation in gas control systems, and analyzer sampling systems.
- The valve ensures positive and consistent shut-off with manual and offers a metal to metal seal to atmosphere for leak integrity with thin plate diaphragm.
Kalvoventtiili (PVDC)
- Working Pressure 145psig(10bar)
- Working Temperature: -10~80°C (-23~176°F)
- Material: SS316L, SS316L VAR
- DCR, Dk-Lok, TBW 1/4″~3/4″ Size
- Minimal Particle Generation
- Moisture Contribution
- Maximum flow & Compact designed inner capacity.
- Minimal contributions of moisture, Oxygen and Hydrocarbon, Minimal particle generation.
- DK-Lok’s own electropolished.
- D.I water cleaned, assembled, tested & packaged in a certified clean room.
- Elgiloy diaphragm material with strong durability as well as corrosion resistance for long cycle life.
- PCTFE seat material with remarkable chemical & thermal resistance.
Kalvoventtiili (TVDC)
- Working Pressure 145psig(10bar)
- Working Temperature: -10~80°C (-23~176°F)
- Material: SS316L, SS316L VAR
- DCR, Dk-Lok, TBW 1/4″~3/4″ Size
- Minimal Particle Generation
- Moisture Contribution
- Maximum flow & Compact designed inner capacity.
- Minimal contributions of moisture, Oxygen and Hydrocarbon, Minimal particle generation.
- DK-Lok’s own electropolished.
- D.I water cleaned, assembled, tested & packaged in a certified clean room.
- Elgiloy diaphragm material with strong durability as well as corrosion resistance for long cycle life.
- PCTFE seat material with remarkable chemical & thermal resistance.
Kalvoventtiili (VDC)
- Working Pressure 145psig(10bar)
- Working Temperature: -10~80°C (-23~176°F)
- Material: SS316L, SS316L VAR
- DCR, Dk-Lok, TBW 1/4″~3/4″ Size
- Minimal Particle Generation
- Moisture Contribution
- Maximum flow & Compact designed inner capacity.
- Minimal contributions of moisture, Oxygen and Hydrocarbon, Minimal particle generation.
- DK-Lok’s own electropolished.
- D.I water cleaned, assembled, tested & packaged in a certified clean room.
- Elgiloy diaphragm material with strong durability as well as corrosion resistance for long cycle life.
- PCTFE seat material with remarkable chemical & thermal resistance.
Kalvoventtiili (VDF)
- Working Pressure 145psig(10bar)
- Working Temperature: -10~80°C (-23~176°F)
- Material: SS304, SS316L, SS316L VAR
- DCR, Dk-Lok, TBW 1/4″~3/4″ Size
- Minimal Particle Generation
- Moisture Contribution
- Maximum flow & Compact designed inner capacity.
- Minimal contributions of moisture, Oxygen and Hydrocarbon, Minimal particle generation.
- DK-Lok’s own electropolished.
- D.I water cleaned, assembled, tested & packaged in a certified clean room.
- Elgiloy diaphragm material with strong durability as well as corrosion resistance for long cycle life.
- PCTFE seat material with remarkable chemical & thermal resistance.
