Teolliset koneet ja laitokset tarvitsevat yleensä keskipakopumppuja nesteiden käsittelyyn. Pumppujen toiminnan lisäksi niiden materiaalilla on erittäin suuri merkitys. Mitä aggressiivisempia aineita käsitellään, sitä tärkeämpää on valita pumppujen valmistukseen oikea materiaali. Muovi on osoittautunut erityisen kestäväksi aggressiivisia ja hankaavia aineita vastaan.
STÜBBE X-CLASS
Properties
- robust and powerful design for extreme tasks
- for handling aggressive substances with a very high solids content
- maximum demands on safety, reliability and service life
- economically attractive solution
Performance ratings & variants
- Flow rate up to 1,100 m³/h
- Delivery height up to 120 m
- Max. drive power up to 315 kW
- Nominal diameters DN: 25 to 200 mm
- in 18 horizontal and 10 vertical sizes
- horizontal or vertical installation
- horizontal series as standardized pumps and block pumps
- with shaft sealing / mechanical seal
- with magnetic coupling
- vertical series in cantilever design
Advanced conditions
- Pressure up to 16 bar / PN16
- Temperature from -20°C to +150°C
- Viscosity up to 400 mm²/s
full plating, suitable for outdoor installation/chemically fully resistant materials, difficult ambient conditions, high piping forces, innovative mechanical seal kit from STÜBBE
Series (Models)
NX, BX, VCX
STÜBBE E-CLASS
Properties
- reliable and cost-effective design
- for handling aggressive substances with a low, non-abrasive solids content
- maximum demands on safety, reliability and service life
- economically attractive solution
Performance ratings & variants
- Flow rate up to 250 m³/h
- Delivery height up to 65 m
- Max. drive power up to 55kW
- Nominal diameters DN: 32 to 100 mm
- in 12 horizontal sizes
- horizontal installation only available as block pump
- with shaft sealing / mechanical seal
Simple conditions
- Pressure up to 9 bar / PN9
- Temperature from +5°C to +100°C
- Viscosity up to 100 mm²/s
protected installation, clean environment, low piping forces, innovative mechanical seal kit from STÜBBE
Series (models)
BE
STÜBBE CLASSIC
Properties
- time-tested and cost-effective design
- for handling aggressive substances without solids content
- maximum demands on safety, reliability and service life
- economically attractive solution
Performance ratings & variants
- Flow rate up to 130 m³/h
- Delivery height up to 42 m
- Max. drive power up to 11 kW
- Nominal diameters DN: 15 to 100 mm
- in 13 different sizes
- horizontal or vertical installation
- horizontal series only as block pumps
- with shaft sealing / mechanical seal
- with magnetic coupling
Simple conditions
- Pressure up to 6 bar / PN6
- Temperature from -20°C to +80°C
- Viscosity up to 100 mm²/s
Series (models)
SHB, SHM, ETLB
